TO SUIT: 180sx, s13, s14, s15, Silvia, 200sx (SR20) To successfully install your gearbox conversion kit for 180sx, s13, s14, s15, Silvia and 200sx’s you will need to machine and modify the Z32 / R33 / R34 gearbox bellhousing; this machining is required to position the input shaft splines correctly on the clutch splines and into the spigot bush, modifying/adding holes for the conversion, and/or adding threads for a suitable slave cylinder. We send you the FULL instructions on what needs to be carried out but if you want a perfect fitting, quality CNC machined bellhousing from the people who designed and engineering the product then look no further… We have pre-machined gearbox bellhousings available as an exchange service – send us your bellhousing and we’ll send you a prepared, machined bellhousing for a quick and easy installation. If our exchange bellhousing has already been sent out it’ll be ~20 days to have yours machined. WHAT’S INVOLVED? Scheduling in the work to machine the bellhousing Cover bearings from machining swarfs and other contaminants Set up, jig and secure the bellhousing on the CNC CNC machining from the front face Perform an inspection Unsecure, turn over and re-secure (re-jig) CNC machining from the rear face Perform an inspection Light air gun clean Quality Assurance review Packaging Delivery YOU NEED TO DO THE FOLLOWING Except for the bearings, remove and keep ALL your excess parts before shipping (or dropping off in person) including: Drain plug Fill plug Countershaft shim (this is usually stuck on with oil inside the bellhousing, or sometimes on the countershaft bearing itself) Selector check-ball valve Front cover Dust boot All fasteners Once you’ve stripped the bellhousing: Clean it inside and outside with degreaser Rinse Dry thoroughly Please clean it thoroughly – inside and outside – if it is unacceptable we will charge you a $250 cleaning fee ORDERING and DELIVERY PROCESS “Add to cart” Proceed through the checkout process Once your order is placed and payment is cleared please ship it to us at: To: ALPHA OMEGA Racing PO BOX 108 Saint Clair, NSW, 2759 Australia Phone: ( 612) 8090 0686 If you prefer to drop it off in person, please Contact Us We check over your bellhousing If there are any issues we will call you to discuss, otherwise… We immediately ship back a freshly machined bellhousing (if you’re dropping off in person then you can grab the exchange bellhousing right away) NOTE: please clean it thoroughly – inside and outside – if it is unacceptable we will charge you a $250 cleaning fee
